Warning: loading old HMI files into the latest Nextion Editor .58

All things relating to the Nextion Screen(s)
KE7FNS
Posts: 222
Joined: Wed Apr 17, 2019 11:11 pm

Re: Warning: loading old HMI files into the latest Nextion Editor .58

Post by KE7FNS » Thu Aug 15, 2019 1:48 am

EA3BIL wrote:
Wed Aug 14, 2019 4:41 pm
Weird.... Yes.
I'll agree with that.

When I uploaded the first one you listed, using the .53 LTS editor, it reported firmware S2049 :shock:

The second file using the .58 editor reported firmware S130

So they must be sending different firmwares from each version of the editor and on top of that different models even get different firmware versions too.

Those screens loaded and worked fine on my testing setups, I didn't run into any issues.

How are you connecting the Nextion screen? I'm using the Nextion port on a MMDVM_HS_Duplex hat, and I also tested it with a Zumspot v.06 simplex board too. So if you are using USB and a TTL adapter, then I need to retest.

EA3BIL
Posts: 34
Joined: Tue Apr 17, 2018 11:45 pm

Re: Warning: loading old HMI files into the latest Nextion Editor .58

Post by EA3BIL » Tue Aug 20, 2019 8:52 am

I'm using the Nextion port on the Dual MMDVM.
Double-double check wiring and they were ok.

Once I had the schema loaded by using the LTS version they worked ok.

:o

Post Reply