IPSC2 DMR+ TX lockup

Help with DMR issues
Post Reply
VE6DV
Posts: 20
Joined: Sun May 13, 2018 4:34 pm
Location: Edmonton, Alberta

IPSC2 DMR+ TX lockup

Post by VE6DV » Wed Oct 09, 2019 3:53 pm

I am experiencing an odd behaviour with an IPSC2 DMR Plus server. I have two talkgroups setup as static in the options= line, talkgroup 315 and talkgroup 320. Talkgroup 320 works fine and I haven't noticed any issues at all but if I transmit to talkgroup 315, my DVMega hat seems to think I am still transmitting with my MD380 even after I release the ptt and I am unable to hear any replies from other stations. I find that if I click the PTT button on the radio it seems to recover and start working normally again. This is an intermittent problem and I can't seem to figure out what is causing it.

Here is the content of the log file, but it doesn't appear to show much of value:

2019-10-09 15:29:35.521 DMR Slot 2, received RF voice header from VE6DV to TG 315
M: 2019-10-09 15:29:53.980 DMR Slot 2, received RF end of voice transmission, 3.6 seconds, BER: 0.8%
M: 2019-10-09 15:33:54.889 DMR Slot 2, received RF voice header from VE6DV to 5000
M: 2019-10-09 15:33:55.789 DMR Slot 2, received RF end of voice transmission, 0.7 seconds, BER: 0.8%
M: 2019-10-09 15:33:56.055 DMR Slot 2, received network late entry from 4000 to TG 9
M: 2019-10-09 15:33:58.290 DMR Slot 2, received network end of voice transmission, 2.3 seconds, 0% packet loss, BER: 0.0%
M: 2019-10-09 15:34:13.087 DMR Slot 2, received RF voice header from VE6DV to TG 315
M: 2019-10-09 15:34:31.355 DMR Slot 2, received RF end of voice transmission, 5.4 seconds, BER: 0.9%

Any idea how I could troubleshoot this issue?
73 - Jeff VE6DV

Post Reply