MMDVM FIRMWARE 1.5.1b

General support for the Pi-Star System
Post Reply
4S7EF
Posts: 16
Joined: Wed Aug 14, 2019 2:50 am
Location: Sri Lanka

MMDVM FIRMWARE 1.5.1b

Post by 4S7EF » Wed Dec 04, 2019 2:39 am

May I know how I could update my MMDVM simplex firmware to 1.5.1b manually?

Thank you
4S7EF

KE7FNS
Posts: 747
Joined: Wed Apr 17, 2019 11:11 pm

Re: MMDVM FIRMWARE 1.5.1b

Post by KE7FNS » Wed Dec 04, 2019 2:56 am

4S7EF wrote:
Wed Dec 04, 2019 2:39 am
May I know how I could update my MMDVM simplex firmware to 1.5.1b manually?

Thank you
4S7EF
https://github.com/juribeparada/MMDVM_HS

You need to download the source code from github and manually compile it and then flash it to your board, the instructions are in the readme.md and build.md pages. You also need to know the configuration settings for your board.

I can't help you any further than that cause you didn't specify which board you have.

Also unless you have a specific reason to run it, I wouldn't flash a beta just because it is new, I'd wait for a stable release.
All views, comments, posts and opinions shared are entirely my own.

4S7EF
Posts: 16
Joined: Wed Aug 14, 2019 2:50 am
Location: Sri Lanka

Re: MMDVM FIRMWARE 1.5.1b

Post by 4S7EF » Wed Dec 04, 2019 4:41 am

Thank you..

Yes, I will wait for the official release.

Best wishes

G0FVT
Posts: 1
Joined: Mon Apr 15, 2019 12:47 pm

Re: MMDVM FIRMWARE 1.5.1b

Post by G0FVT » Thu Jan 30, 2020 9:49 pm

It just takes a few lines of script (the following is for a Jumbospot different modems need slightly different syntax), uploaded as an image.
Attachments
update.png
settings to update Jumbospot
update.png (10.11 KiB) Viewed 498 times

Post Reply