Auto AP mode is designed to provide a setup wifi for you to connect to, if your Pi-Star device is not already on a network.
If Pi-Star does not detect a known wifi network within approximately the first 2 minutes of booting up, it will create its own wifi called Pistar-Setup.
Using your computer/phone, you can then connect to the Pistar-Setup wifi. The password for this network is: raspberry
Once you have connected to the Pistar-Setup wifi, you will be able to pull up the dashboard. Make your wifi configuration changes. Save them, and reboot Pi-Star. It will not access the new network until you reboot.
What is Auto AP and how do I use it?
What is Auto AP and how do I use it?
Mike
K2GC
Hotspots
Zumspot Pi-0 ■ DV-Mega Pi-3
Radios
D-star -> ID-5100 ■ ID-51+ ■ IC7100
DMR -> GD-77 ■ GD-55+ ■ RD-5R ■ CS-800D
Fusion -> FT-70dr
Other -> TK-790 ■ TK-890 ■ TK-6110 ■ XTL-2500 ■ FT-450 ■ TS-480SAT ■ Flex 5000
K2GC
Hotspots
Zumspot Pi-0 ■ DV-Mega Pi-3
Radios
D-star -> ID-5100 ■ ID-51+ ■ IC7100
DMR -> GD-77 ■ GD-55+ ■ RD-5R ■ CS-800D
Fusion -> FT-70dr
Other -> TK-790 ■ TK-890 ■ TK-6110 ■ XTL-2500 ■ FT-450 ■ TS-480SAT ■ Flex 5000