Hi
To all out there looking for some help I asked this question a long time ago, but this is me just getting organized,
Is there anyone out there that can tell me how to set up the memories on an Icom 2820 to work with a ZumSpot letting me change reflectors from the radio
Any help would be very much appreciated
Sam
GM0VWZ
iCOM 2820 AND ZUMSPOT
Re: iCOM 2820 AND ZUMSPOT
Use the UR memories. Rather than programming separate radio memories. It's a lot easier than having multiple memories that will essentially have the same frequency, offset, rpt1 and rpt2 and just the UR field will be different. You only really need one radio memory programmed with freq. offset, rpt1 & 2 everything else will be done via UR commands.
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: iCOM 2820 AND ZUMSPOT
Hi Andrew
Thanks very much for your information on the Icom 2820 and the
ZumSpot I will set this up shortly.
Many Thanks Again
Sam
GM0VWZ
Thanks very much for your information on the Icom 2820 and the
ZumSpot I will set this up shortly.
Many Thanks Again
Sam
GM0VWZ