BM Manager - reset

Help with DMR issues
Post Reply
VK2FMET
Posts: 42
Joined: Fri Dec 20, 2019 1:19 am

BM Manager - reset

Post by VK2FMET » Thu Mar 19, 2020 1:05 am

BM Manager.png
BM Manager.png (80.76 KiB) Viewed 331 times
Hi - I've installed the BM Manager
But I've tried all the options with no luck
I'm trying to reset (disengage from TG91) with no luck.
When a QSO is going on it's sometimes near impossible to get a PC to 4000 inserted between overs. With Selfcare you can select and remove TG91 but it pops straight back with the next over.
With every option in the manager I have tried, same result.
Is there a way to drop TG91 in this manager while a QSO is ongoing?
Alan
VK2FMET

AF6VN
Posts: 335
Joined: Fri Jul 20, 2018 1:15 am

Re: BM Manager - reset

Post by AF6VN » Thu Mar 19, 2020 5:38 pm

Not easily -- for Brandmeister hotspots (not repeaters), the last used (Tx from you) talk group gets flagged as a pseudo-static group; it doesn't time out, and likely is not removed by the "drop all dynamic".

You probably have to activate the "drop" commands, and hope to PTT on a different talk group before any traffic comes in again.

--
AF6VN
Dennis L Bieber

Post Reply