OLED 1.3” screensaver on ZUMSpot does not work.
Posted: Sun Apr 05, 2020 6:02 pm
My ZUMspot functions perfectly as a DMR hotspot.
(purchased from HRO USA)
The OLED shows MMVDM logo when idle.
The OLED displays DMR activity info during calls.
But the screensaver never activates.
I am running on RasPi Zero/W with ZumSpot:
Pi-Star:3.4.17 / Dashboard: 20200221
Detected MMDVM_HS (GPIO): /dev/ttyAMA0 (ZUMspot-v1.4.16 20190211 14.7456MHz ADF7021 FW by CA6JAU GitID #8cf46ca)
my /etc/mmdvmhost has section
[OLED]
Type=6
Brightness=0
Invert=0
Scroll=0
Rotate=0
Cast=0
LogoScreensaver=1
These OLED functions DO work when configured:
Invert= 0 / 1 (wt/blk, blk/wt)
Rotate= 0 / 1 (0, 180 flip)
These functions do NOT work:
Scroll=
LogoScreensaver=
I tried updating..
I get ‘no updates found’ when update or upgrade.
I am not sure where to look. Driver? Firmware? Hardware?
Appreciate the help.
Thanks,
Greg
(purchased from HRO USA)
The OLED shows MMVDM logo when idle.
The OLED displays DMR activity info during calls.
But the screensaver never activates.
I am running on RasPi Zero/W with ZumSpot:
Pi-Star:3.4.17 / Dashboard: 20200221
Detected MMDVM_HS (GPIO): /dev/ttyAMA0 (ZUMspot-v1.4.16 20190211 14.7456MHz ADF7021 FW by CA6JAU GitID #8cf46ca)
my /etc/mmdvmhost has section
[OLED]
Type=6
Brightness=0
Invert=0
Scroll=0
Rotate=0
Cast=0
LogoScreensaver=1
These OLED functions DO work when configured:
Invert= 0 / 1 (wt/blk, blk/wt)
Rotate= 0 / 1 (0, 180 flip)
These functions do NOT work:
Scroll=
LogoScreensaver=
I tried updating..
I get ‘no updates found’ when update or upgrade.
I am not sure where to look. Driver? Firmware? Hardware?
Appreciate the help.
Thanks,
Greg