forum.pistar.uk

Howdy

I have a zumspot with pistar.

I also use this with my ID-31 Icom. I have a long list of reflectors like REF001C REF030C etc. I want to be able to use DCS972A, DCS972B and so on which are local DCS reflectors. I was able to program memory reflectors on my Openspot Shark RF, however, I have a mobile Zumspot with pistar that I would like to use AND I was to be able to access the DCS972A, etc using my mobile zumspot/pistar with my ID31.

Does anyone know how to add a DCS Reflector to the ID 31 so that I can use the Zumspot/pistar to access these reflectors?

73

Mark 4x1ks

I suggest that you watch this video from K9WLW:

https://www.youtube.com/watch?v=7ZzHM8z-jms

It would also be sensible to also watch this:

https://www.youtube.com/watch?v=gsogCN6ydEE

as it helps to ensure that all the needed settings appear in the right menus.

There are some other useful videos on his channel.

HTH

If you had a keypad it would be simple D972A. Given you havnt you'll need to set UR to read DCS972AL

DCS as it's DCS
927 the interested reflector
A the reflector module
L the dstar link command

Select that UR and keyup.
If successful you'll get a linked to DCS927 alpha reply.

Sent from my SM-G935F using Tapatalk