DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0
DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0
I have a DV-Rptr1 here and it once worked with Pi-Star. Now I wanted to use a Raspberry B + and the current PI-Star 4.0 but the DV-Rptr1 does not seem to work or is doing something wrong. Could it be that the DV-Rptr1 only works with a Raspberry 3 B and the PI-Star version 3.4.17 ??????? Can you tell me which controller I have to set to make it work ??? I hope you could help me further. 73 de Stefan, DO1SGL
Re: DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0
Setup pistar as a dstarrepeater setup. The dvrptr card won't run as a pistar Mmdvmhsost setup.
Also, don't run the 4.0 install it's now defunct. Install 4.1
Sent from my SM-G935F using Tapatalk
Also, don't run the 4.0 install it's now defunct. Install 4.1
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0
Yes I have now installed Pi-Star 4.1.0, when I go to the DStarRepeater where do I have to do the fine adjustment ...?.? Is there a rough direction of how the settings have to be ????? I have unfortunately found nothing on the net where this information is ..
Re: DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0
The parameters will be different depending which radio you are using alongside the card.
Rx invert, Tx invert, Rx audio, Tx audio. Will all need adjusting.
Sent from my SM-G935F using Tapatalk
Rx invert, Tx invert, Rx audio, Tx audio. Will all need adjusting.
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0
Stephan: Were you able to get your DVRPTR working? I have a similar setup (V1 board, RPi 3b, latest version of Pi-Star connected to Kenwood V71), and can receive, but my transmit does not seem to be going out...../gary W0EDN