forum.pistar.uk

Hi all,
I have noticed an extrange issue after installing new image V4.1.0 on my Jumbo Hotspot.
With previous version all works OK so I suppose no hardware problem on my radios or Hotspot.
When I connec to YSF00002 Host - Link YSF2DMR the signal transmited from hotspot (in C4FM) is not decoded in my FT2D handheld and FTM100D, carrier is there but audio is muted. But curiously in my FT-991 audio is decoded OK. I have tested in various TG's
Other YSF host connexions runs OK on all my radios, also tested with YSF00001 - Parrot.
Going back to previos pi-star image 3.4.17 everything is OK.
Some idea?

Regards and take care.

73's
Inigo EB2AQH

Yep, it's a known thing. Run an update to get the latest updates which includes a patch hopefully addressing this.

Ps my ft2 runs fine without the update. There's a few post saying X works Y doesn't whilst others have Y working as well as X this is a def. weird one.

Sent from my SM-G935F using Tapatalk

I had the same problem. No audio is audible on the Yaesu FT-7250.

I have set the parameter for the transmission power RF level from 100 to 15.

Now I can hear flawless audio.

Give it a try.

73 de Harald

The latest patch still doesn't work for all radios. The ft70d is one that doesn't work.

Sent from my SM-A102U using Tapatalk

Thanks for answers.

After updating with lastest patch:
FT-991 OK
FTM-100D OK
FT2D KO

73's EB2AQH