forum.pistar.uk

Howdy!

I have a strange situation where the Active BrandMeister Connections information displayed on the Admin page on my ZUMspot Simplex and Duplex hotspots drops in and out randomly. The two models are a RPi3A+ and an RPi0W, both running v4.1.2.

The dropouts seem random but the information eventually repopulates on its own. Refreshing the page has mixed results, sometimes causing the information to return immediately and sometimes not. When the dropouts occur, only the BrandMeister Master information remains correct as set - BM United States 3102. The other fields - Default Ref, Timeout(s), Active Ref, Static TGs and Dynamic TGs show Not Set, Not Set, None, None and None respectively.

Both were re-flashed and reconfigured. However, the problem still occurs. Changing BrandMeister Master to BM United States 3101 also has no effect. I attempted to attach a screenshot but the resolution was too poor.

Anybody else experience this? And, if so, what did you do to correct it?


Thank you,

N0XRV, - Malcolm

I only run one at a time. ESSIDs are different as well. I first noticed it while using the duplex. Figured I’d see if it occurred on a simplex; it does. Live logs look normal - no drops and reconnects.

All 8 of my hotspots (i.e 2 duplex hats, 5 simplex hats and 1 GD77) have BM security. I do understand that duplex hotsots are different than simplex hotspots. I also understand the differences between dynamic, static and auto-static TGs. I mainly use Pi-Star to set static TGs. However, I occasionally log into BM and manage TGs for the hotspot currently being used.