Audio Quality on YSF2DMR Crossmode
Posted: Sat Sep 05, 2020 9:45 am
Hi Folks
Has anybody noticed that the audio quality in quite poor when connected to DMR via DMR2YSF? I have been experiencing what I can only describe as over modulated QSO's when using DMR TG91 from my FT2DE. A side by side test with my TYT MD380 proves that the audio is crystal clear when using native DMR mode on pi-star and a dedicated DMR HT (same TG). Audio quality from the FT2DE is crystal clear on native YSF so I was interested to hear from anyone that has experienced similar issues?
Perhaps there is a setting I have missed or config on my hotspot that needs looking at?
Using V4.1.2 through a ZumSpot USB on a dedicated RP3..
Appreciate your comments and thoughts
73
Has anybody noticed that the audio quality in quite poor when connected to DMR via DMR2YSF? I have been experiencing what I can only describe as over modulated QSO's when using DMR TG91 from my FT2DE. A side by side test with my TYT MD380 proves that the audio is crystal clear when using native DMR mode on pi-star and a dedicated DMR HT (same TG). Audio quality from the FT2DE is crystal clear on native YSF so I was interested to hear from anyone that has experienced similar issues?
Perhaps there is a setting I have missed or config on my hotspot that needs looking at?
Using V4.1.2 through a ZumSpot USB on a dedicated RP3..
Appreciate your comments and thoughts
73