forum.pistar.uk

Is it possible to configure my ZUM RPI Nextion 2.4 to duplex, so that I can unlink or link quickly, even though one of those long-winded QSOs with quick-keying is going on (my hotspot is transmitting) at the time?
And, if this (duplex or half-duplex) is possible, how much frequency separation between RX and TX is necessary?

Thanks & 73
Jay
W6CJ

KE7FNS wrote: ↑Wed Oct 07, 2020 3:28 am Digital modes can be separated by 12.5 kHz, but you should be using the standard bandplan repeater offsets since you are technically running a repeater.

While that is the minimum channel spacing, a duplex hat may be victim of adjacent channel interference (we've recently had a thread where a user had a 25kHz Rx/Tx spacing and was not able to reach the unit; when they followed my suggestion to use a much wider spacing it began functioning for them).