Understanding Duplex MMDVM hat
Understanding Duplex MMDVM hat
I have the pi3B+ board. I have an Icom ID31 D-star radio. We have a D-star repeater the is on 146 mHz. If I put a Duplex MMDVM Hat on my pi will pi-star allow me to access the above mentioned repeater. I am still quite green when it comes to pi-star.
Re: Understanding Duplex MMDVM hat
No. Your hotspot will essentially be a repeater. You can connect to any reflectors you want; but you cannot link to a physical repeater.
Sent from my SM-A102U using Tapatalk
Sent from my SM-A102U using Tapatalk
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.
Re: Understanding Duplex MMDVM hat
Hi,
best wishes for 2021.
You can conncect to a repeater:
set URcall to "CALL BL" (B --> repeater call is on VHF use mode B, L for Link). I programmed that in the trx and it works.
URcall "CALL BU" to unlink.
Does not work in the pi-star software, you have to do it with your trx URcall in repeater mode DR
Best Regards
73
Kai
dh3ybe
best wishes for 2021.
You can conncect to a repeater:
set URcall to "CALL BL" (B --> repeater call is on VHF use mode B, L for Link). I programmed that in the trx and it works.
URcall "CALL BU" to unlink.
Does not work in the pi-star software, you have to do it with your trx URcall in repeater mode DR
Best Regards
73
Kai
dh3ybe
Re: Understanding Duplex MMDVM hat
B is uhf module, C is vhf.
AB1CD BL would connect to a 70cms module link.
AB1CD CL would connect to a 2m module link.
_______U (<- seven spaces and a U) to unlink.
Sent from my SM-G935F using Tapatalk
AB1CD BL would connect to a 70cms module link.
AB1CD CL would connect to a 2m module link.
_______U (<- seven spaces and a U) to unlink.
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: Understanding Duplex MMDVM hat
Thanks For your remarks Andrew,i was really wrong
73
Kai
dh3ybe
73
Kai
dh3ybe