Hey all,
I was wondering where in pi-star you setup your default reflector so when there is X time of no local activity it will auto switch to your selected reflector.
The only place I can see remotely close is under ircDDBgateway under "reconnect". I have set this to 20, for what i assume is 20min, and also "1" for on, not knowing what parameter should be set. Anyone?
Ben
How to enable reconnect to default reflector
Re: How to enable reconnect to default reflector
For 20min you must write 5 ;Like This:
- Attachments
-
- Reconnect.png (112.08 KiB) Viewed 15420 times
IK8JHL Francesco ****REF080A****
https://digilanditalia.wordpress.com/
https://digilanditalia.wordpress.com/
Re: How to enable reconnect to default reflector
If you are ever in San Antonio, Please let me buy you a beer! Thank you sooo much!
Re: How to enable reconnect to default reflector
Excellent advice - thank you!
Re: How to enable reconnect to default reflector
Its pleasure to collaborate , thanks for beer
IK8JHL Francesco ****REF080A****
https://digilanditalia.wordpress.com/
https://digilanditalia.wordpress.com/
- NL13716
- Posts: 2
- Joined: Mon Feb 10, 2020 3:16 am
- Location: Bergen op Zoom, The Netherlands
- Contact:
Re: How to enable reconnect to default reflector
I have to reply to this rather old topic.
Somehow my setup refuses to switch back to its default reflector.
I have tried everytihng I have found on the net but nothing seems to solve my problem.
Any idea's?
Tnx
Somehow my setup refuses to switch back to its default reflector.
I have tried everytihng I have found on the net but nothing seems to solve my problem.
Any idea's?
Tnx