Page 1 of 1
Red Highlighted Frequency
Posted: Mon Feb 01, 2021 4:10 pm
by W0EDN
When setting up Pi-Star in Config, why is the frequency cell highlighted in RED for one frequency, and for other frequencies I input it turns to a GREEN highlight?
/W0EDN
Re: Red Highlighted Frequency
Posted: Mon Feb 01, 2021 5:06 pm
by G8SEZ
It's to prevent you setting it up with a frequency in the UHF satellite allocation, 435 to 438 MHz.
Re: Red Highlighted Frequency
Posted: Mon Feb 01, 2021 5:57 pm
by MW0MWZ
G8SEZ wrote: ↑Mon Feb 01, 2021 5:06 pm
It's to prevent you setting it up with a frequency in the UHF satellite allocation, 435 to 438 MHz.
Or setting one that is out of band, it wont stop you setting that frequency - but the MMDVM_HS firmware will stop MMDVM from starting if you pick a frequency in the satellite band.
Re: Red Highlighted Frequency
Posted: Mon Feb 01, 2021 6:41 pm
by W0EDN
Thank you for the information..../W0EDN