Hello to all...
I've noticed since I updated to Pi-Star:4.1.4 / Dashboard: 20210205 that the P25 shows that the service is not running. However there's P25 activity (as normal) Firstly, is anyone else noticing this?
My thinking was that the log files might not be getting read due to beeing too big, but I purged the logs and rebooted the pi but once the system was back up it was diplaying the same again. So I then forced it to connect to a few different p25 reflectors but the dashboard still states that the service is not running. this is cleary a cosmetic issue! but I wanted to check if anyone else has noticed the same behaviour?
Cheers
Pi-star Dashboard P25 service is not running
Re: Pi-star Dashboard P25 service is not running
Yes, same thing here. Happened after the upgrade. I also run NXDN and while the Dashboard does indicate my default Talk Group number, it apparently is not linked to it. When I PTT on NXDN, it then links. I will have to check it and see if it unlinks or stays linked.
So basically the same behavior with NXDN in the background, however the dashboard shows the status differently. Either way, both modes are not behaving as expected.
Thanks
Dean KD4TWJ
So basically the same behavior with NXDN in the background, however the dashboard shows the status differently. Either way, both modes are not behaving as expected.
Thanks
Dean KD4TWJ
Re: Pi-star Dashboard P25 service is not running
This is also the case after my update。
- Attachments
-
- 未标题-1.jpg (241.48 KiB) Viewed 8558 times
Re: Pi-star Dashboard P25 service is not running
Yes, same here, Scott. And on NXDN as well.
Edit: after hitting "Apply Changes" on the config page, it now reads "Not Linked" under P25 Network, even though it appears to be linked and working as expected.
Edit: after hitting "Apply Changes" on the config page, it now reads "Not Linked" under P25 Network, even though it appears to be linked and working as expected.
Robert (Bud) M. Talbot III
W0RMT
Colorado Digital system admin
http://coloradodigital.net
DMR: BM 31088
DSTAR: XRF/DCS303D
YSF: 99256
NXDN: 31088
P25: 31088
W0RMT
Colorado Digital system admin
http://coloradodigital.net
DMR: BM 31088
DSTAR: XRF/DCS303D
YSF: 99256
NXDN: 31088
P25: 31088
Re: Pi-star Dashboard P25 service is not running
Before update the YSF2P25 cross mode worked fine. Now the audio is distorted gobbeldy-gook! YSF native mode is fine.
Re: Pi-star Dashboard P25 service is not running
I have noticed on mine that it is dropping the link on P25 after some time of inactivity. I am not sure what that time duration is yet.
It is not configured to timeout.
I have not had a chance to check that on NXDN yet.
Thanks
Dean KD4TWJ
It is not configured to timeout.
I have not had a chance to check that on NXDN yet.
Thanks
Dean KD4TWJ
Re: Pi-star Dashboard P25 service is not running
I'm also seeing: "Not Linked" .
Additionally, my "Startup Host (TG)" isn't initiated at startup. I can select a reflector after pi-star is running, and it works; but initially it starts with no default reflector.
Tom / K5TRA
Additionally, my "Startup Host (TG)" isn't initiated at startup. I can select a reflector after pi-star is running, and it works; but initially it starts with no default reflector.
Tom / K5TRA
Re: Pi-star Dashboard P25 service is not running
Another observation:
1) My repeaters running "ZUM Radio MMDVM for Pi (GPIO)" will display: "Not Linked"
2) My repeater running "STM32-DVM / MMDVM_HS - Raspberry Pi Hat (GPIO)" will display: "Service Not Started"
Thanks,
Tom / K5TRA
1) My repeaters running "ZUM Radio MMDVM for Pi (GPIO)" will display: "Not Linked"
2) My repeater running "STM32-DVM / MMDVM_HS - Raspberry Pi Hat (GPIO)" will display: "Service Not Started"
Thanks,
Tom / K5TRA
Re: Pi-star Dashboard P25 service is not running
Any different with a different modem selected?
I'm thinking of the "MMDVM_HS_HAT (DB9MAT & DF2ET) for GPIO" option. I've never had any success with the STM32-DVM setting.
I will add that I don't use P25 so it is a different setup here.
I'm thinking of the "MMDVM_HS_HAT (DB9MAT & DF2ET) for GPIO" option. I've never had any success with the STM32-DVM setting.
I will add that I don't use P25 so it is a different setup here.
--
Brian G8SEZ
Brian G8SEZ
Re: Pi-star Dashboard P25 service is not running
I have several different mmdvm devices and of those that are being used for P25, so upon a cold boot it will display "service not started" if you either apply configuration or use the CLI to change the connected reflector the dashboard will state not connected.G8SEZ wrote:Any different with a different modem selected?
I'm thinking of the "MMDVM_HS_HAT (DB9MAT & DF2ET) for GPIO" option. I've never had any success with the STM32-DVM setting.
I will add that I don't use P25 so it is a different setup here.
Sent from my Pixel 4 XL using Tapatalk