forum.pistar.uk

Hello,

I have setup DMRGateway. On [DMR Network 3]. I set Enable to 1 hit apply. Reboot. If I make any changes on the Configuration page. Then DMRGateway [DMR Network 3] reverts back to 0.

Any ideas for a fix?

Pi-Star V 4.1.2 and 4.1.4

Thanks, David
KE6UPI

Change your network 3 to network 4

Network 3 is the DMR2XXX crossover mode -- it will revert to disabled as it is reading the crossover state(s)