forum.pistar.uk

My Paul's AT878 is connected to my Pi-star hotspot. I see activity on the dasboard but no sound at all. YSF has been working fine.

Hotspot frequency:443.225. YSF has been functional since June 2020.. I monitor on my ftm400.I see RF but no audio. I am connected to TG 31656 and the dashboard shows hams connecting and talking.

Yes, that TG 9 was a YSF2DMR contact. Yes I know dmr and ysf are different. Your comment about my last connection shows me the hotspot connected to TG 31656, but the AT868 is not. I believe the hotspot is configured correctly but the radio is missing some magic dmr setting. Thanks for guidance & 73

KE7FNS wrote: ↑Mon Jun 07, 2021 9:24 pm Normally you setup a channel to only listen to the single talkgroup you are currently monitoring, so if you have a channel programmed for 3100, and a response comes in from 91, it won't play the audio. In that case you need to change the channel on your radio to one designated for 91.

It is possible to set up a receive group list and assign the list to each configured channel. That allows one to hear traffic on any talk group in the list, though one has to change to a channel dedicated to the active group to respond (untested, but I believe some radios have the ability to reply to the active group so long as the display has not timed out).

We already announced this. Or at least i think we announced it...

BM USA asked us to aid them in moving users off of 3101 by removing it as an option in PS.
3104 was added as a replacement server.

i used that post here with a simple copy paste over to the FB page to aid me, due to other work commitments at the time.





Sent from my SM-G935F using Tapatalk

I received the programming cable yesterday and was able to tweak the codeplug, change my America Link contact to group call and reset the DMR ID to my friend's number. Now I can hear and transmit. Thanks for all the excellent advice. 73