Page 1 of 1
HELP! DMR does not work anymore after update to 4.1.5
Posted: Tue Aug 17, 2021 5:57 pm
by HJ4MOR
Hello everyone, recently I have updated my JumboSpot to the latest firmware from pi-star, any who, now, I cannot receive anything, and also the dmr network icon shows red after a couple of minutes, also on the top part of the admin dashboard the icon from the dmr gateway is now red all the time, I have no idea what's going on, before the update everything worked as expected, now I have no clue.
Any help would be apreciated. Cheers.
HK4MOR
Re: HELP! DMR does not work anymore after update to 4.1.5
Posted: Wed Aug 18, 2021 10:52 am
by HJ4MOR
KE7FNS wrote: ↑Tue Aug 17, 2021 7:38 pm
HJ4MOR wrote: ↑Tue Aug 17, 2021 5:57 pm
I have no idea what's going on
I would just reimage the SD card with the latest image and start over from scratch. I have a suspicion that the DMRGateway configuration is missing essential parts, causing it to fail.
If you have a backup you can try to restore that, but if your backup is also missing parts then its also not going to work, which is why I suggest just re-entering the information.
Thanks for the suggestion, I will do so today and see what happens. Cheers.
Re: HELP! DMR does not work anymore after update to 4.1.5
Posted: Fri Aug 27, 2021 12:25 am
by N6WY
I also have this problem. Did you find a solution?
Re: HELP! DMR does not work anymore after update to 4.1.5
Posted: Sat Aug 28, 2021 1:43 am
by N6WY
I found my problem. Configuration page setting error. For my hotspot (RFinder HCP-1) I need to have the MMDVM Display Type Port set to Modem not tty.