ftm 7250 not working on my pi-star zumspot

Something has you frustrated, let it all out, you can even abuse the Pi-Star team here too!
Post Reply
n1mjs
Posts: 4
Joined: Mon Aug 30, 2021 8:46 pm

ftm 7250 not working on my pi-star zumspot

Post by n1mjs »

ok just need to say that both my ftm 400 and ft 70-d work just fine with my zumspot the 7250 receives the stations on america link the only time the 7250 will work on my zumspot is 1 time after powering off and on the radio that the only time. i am on NEC-LINK(80389) wires X all the time. i can't figure out why it works the 1 time only?? there are no offsets on the frequency I'm using. thanks N1MJS
n1mjs
Posts: 4
Joined: Mon Aug 30, 2021 8:46 pm

Re: ftm 7250 not working on my pi-star zumspot

Post by n1mjs »

i know its not a Yaesu issue . i'm just curious if anyone has had this same issue with there 7250/pie-star Zumspot?
n1mjs
Posts: 4
Joined: Mon Aug 30, 2021 8:46 pm

Re: ftm 7250 not working on my pi-star zumspot

Post by n1mjs »

oops not sure how i posted it twice?
n1mjs
Posts: 4
Joined: Mon Aug 30, 2021 8:46 pm

Re: ftm 7250 not working on my pi-star zumspot

Post by n1mjs »

my proof that it isn't is my call sign doesn't not show on the zumspot or rf in the dashboard as i stated it does 1 time after powering radio off/on
Post Reply