Need some help with DMR2YSF settings
Posted: Sat Sep 25, 2021 5:48 pm
I've got my hotspot up and running and have it configured for DMR2YSF. The hotspot is showing activity and all the buttons appear to be correct, i.e. DMR and DMR XMode are both green as well as DMR network and DMR2YSF network.
I wrote a new codeplug for my Anytone 878plus. I've got several YSF talkgroups programmed in but I keep getting TX PROHIBIT when I try to transmit. I am using just the 5 digit YSF reflector number for the talkgroup ID. Is that correct or do I have to add "YSF" or "TG" in front of the number?
I made sure the color code settings for the groups I programmed were Color Code 1 and Time Slot 2 - all are set to group call. Is that all correct?
Thanks
I wrote a new codeplug for my Anytone 878plus. I've got several YSF talkgroups programmed in but I keep getting TX PROHIBIT when I try to transmit. I am using just the 5 digit YSF reflector number for the talkgroup ID. Is that correct or do I have to add "YSF" or "TG" in front of the number?
I made sure the color code settings for the groups I programmed were Color Code 1 and Time Slot 2 - all are set to group call. Is that all correct?
Thanks