forum.pistar.uk

Hello, I cant get past this on one of my hotspots??? Others a-ok. Have re imaged to no avail.

Regards

Mark



Starting update, please wait...
Stopping Services...
Done
Updating DV Binaries...
fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... s_Bin.git/': Failed to connect to github.com port 443: No route to host
Updating /usr/local/bin...
fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... s_Bin.git/': Failed to connect to github.com port 443: No route to host
fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... s_Bin.git/': Failed to connect to github.com port 443: No route to host
Updates were not successfull, reverting to Pi-Star original files...
HEAD is now at c66ba30 Update platformDetect.sh
Done
Updating Pi-Star Binaries...
fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... _sbin.git/': Failed to connect to github.com port 443: No route to host
Updating /usr/local/sbin...
fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... _sbin.git/': Failed to connect to github.com port 443: No route to host
fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... _sbin.git/': Failed to connect to github.com port 443: No route to host
fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... _sbin.git/': Failed to connect to github.com port 443: No route to host
Updates were not successfull, reverting to Pi-Star original files...
HEAD is now at 06ce090 Update pistar-remote
Done
Updating Hostfiles...

well 2 other pi-star's are on the same physical network, in fact the same switch, so, i sort of doubt it unless the config of the system is stuffed? but I re imaged the card, still the same result.

if you can SSH into the pi-star, try the following;

ping 4.2.2.1

it should return something like;

ping 4.2.2.1
PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data.
64 bytes from 4.2.2.1: icmp_seq=1 ttl=57 time=27.1 ms
64 bytes from 4.2.2.1: icmp_seq=2 ttl=57 time=27.0 ms

vk3jma wrote: ↑Sun Oct 03, 2021 5:09 am well 2 other pi-star's are on the same physical network, in fact the same switch, so, i sort of doubt it unless the config of the system is stuffed? but I re imaged the card, still the same result.

Have you ensured all those nodes have distinct host names. Two nodes with the same host name could confuse the router.

Well I did the re-image again and this time I started RAW, ie, did not copy my config file across and instead manually set up this particular hotspot from scratch. expert/update/upgade all worked fine.

All I can assume was that my config file had some sort of corruption that caused my issues.

Thanks for your input.

Mark

I appreciate your input and I understand that it appeared to be a network issue, however, I have 4 other pistar hotspots, yes, all with a different host name, all running the same version/dashboard, all updating as they should, all on the same network.

I fail to see how an identical unit on the same network would have issues unless there was a corrupt file in the configs.

Re-imaging and giving exactly the same credentials/identity as before, it worked.

The only difference was that I did NOT copy across my backed up config, i instead built it by hand from the configuration page.

Anyway, all good now.

Thanks

Mark

Hello,

So your 4th hotspot Van have a network problem based on a bad connectivity because additional network devices or Smartphone disturbed the wlan or lan Connection or your router hat a reboot…

So Network Connection are not everytime easy to understand

Best Regards
Kai
Dh3ybe