Reading TX / RX status via CLI
Posted: Sat Dec 11, 2021 12:06 pm
Moin,
is there a chance to read the HF status (mmdvm transmitting oder mmdvm receiving) from the commandline? Like reading the temperature
echo "$(cat /sys/class/thermal/thermal_zone0/temp) / 1000" | bc
vy 73 de Micha, DD0UL
is there a chance to read the HF status (mmdvm transmitting oder mmdvm receiving) from the commandline? Like reading the temperature
echo "$(cat /sys/class/thermal/thermal_zone0/temp) / 1000" | bc
vy 73 de Micha, DD0UL