Pimoroni OnOff shim (software.)
Posted: Wed Feb 02, 2022 8:54 pm
Hi.
Had a look around the forum before asking, and only found two messages relating to the OnOff shim, and no idea if they were successful.
So... Has anyone successfully added one of these to a Pi-Star? https://shop.pimoroni.com/products/onoff-shim (As it would be useful when running without a link to the dashboard etc.)
I'm OK wrangling hardware, but just want to check if there are any caveats / clashes / stuff to be aware of / avoid etc. BEFORE I mess with an otherwise reliable hot-spot stack (with one of the small OLED screens and wired LAN card) in regards to installing the needed software for the button to work.
Of course, a full backup of the SD card will be taken first, and verified!
73. Dave G0WBX, preparing to dig a deep rabbit hole..
><
Had a look around the forum before asking, and only found two messages relating to the OnOff shim, and no idea if they were successful.
So... Has anyone successfully added one of these to a Pi-Star? https://shop.pimoroni.com/products/onoff-shim (As it would be useful when running without a link to the dashboard etc.)
I'm OK wrangling hardware, but just want to check if there are any caveats / clashes / stuff to be aware of / avoid etc. BEFORE I mess with an otherwise reliable hot-spot stack (with one of the small OLED screens and wired LAN card) in regards to installing the needed software for the button to work.
Of course, a full backup of the SD card will be taken first, and verified!
73. Dave G0WBX, preparing to dig a deep rabbit hole..
><