Little snag in 4.1.6 beta
Posted: Sat Feb 05, 2022 6:10 pm
Hi all
I was forced to install beta today because BM API stopped working on the 3.x version.
Here are my observations and solutions:
- After install the wifi used for configuration does not come up - connect ethernet cable and you will access it that way
- After configuring wifi network and issuing connect, pi-star does not acquire IP address, this is due to error in
If you change 'static' to 'dhcp' and reboot, it will work as expected. No more ethernet cable needed.
Other than that, 4.1.6 seems to work perfectly fine. I would say the OrangePi feels snappier than before, so all in all great outcome.
Thank you,
Vy 73!
Tom M0TQM
I was forced to install beta today because BM API stopped working on the 3.x version.
Here are my observations and solutions:
- After install the wifi used for configuration does not come up - connect ethernet cable and you will access it that way
- After configuring wifi network and issuing connect, pi-star does not acquire IP address, this is due to error in
file, which says/etc/default/interfaces
Code: Select all
allow-hotplug wlan0
iface wlan0 inet static
Other than that, 4.1.6 seems to work perfectly fine. I would say the OrangePi feels snappier than before, so all in all great outcome.
Thank you,
Vy 73!
Tom M0TQM