forum.pistar.uk

Good morning, this is my first post so please advise if I should be doing anything different.

I have a generic hot spot running on a Pi-zero. After a fairly long learning curve, I have it running....somewhat. My problem is that when I transmit from my TYT 380 radio, there is a several second delay before it shows up on my dashboard. The hotspot shows my call and the transmit time begins... but never stops until I key the radio a second time... like an "alternate action" switch. (Push - on, Push - off). The radio is not transmitting in between, but the hot spot shows it is.

I have reloaded the software, upgraded the software, and rebooted; but it comes back.

Does anyone have any suggestions?

From AA8KJ: I also notice that the mmDVMhost light goes to "gray" from green on the ADMIN screen when this takes place.