Page 1 of 1

TGIG configuration

Posted: Fri May 13, 2022 6:56 am
by EA3W
Hello everyone:

Why isn't there a TGIF setup window the same as for XLX, DMR+ or BM in the general Pi-Star setup?

Greetings from Catalonia 73

Re: TGIG configuration

Posted: Fri May 13, 2022 7:04 am
by EA3W
Now I have it like this configured in DMR GW but it is very difficult to change TG and not if it is the correct way.

[DMR Network 4]
Enabled=1
Name=Prime_TGIF_Network
Address=prime.tgif.network
Port=62031
Local=62035
Id=214317405
TGRewrite0=2,5000001,2,1,999999
Password="XXXXXXXXX"
Location=1
Debug=1

[DMR Network 5]
Enabled=1
Name=Prime_TGIF_Network
Address=prime.tgif.network
Port=62031
Local=62035
Id=214317406
TGRewrite0=2,5000001,2,1,999999
Password="XXXXXXX"
Location=1
Debug=1

Re: TGIG configuration

Posted: Mon May 16, 2022 3:04 pm
by VE3RD
A couple of Changes are suggested below


[DMR Network 4]
Address=prime.tgif.network
change to (This still works but may be discontinued in the future)
Address=tgif.network

TGRewrite0=2,5000001,2,1,999999
Change to ( the 4 is used to select the network )
TGRewrite0=2,4000001,2,1,999999

[DMR Network 5]
Enabled=1
Turn this off or change it to a different Server.
Enabled=0
TGRewrite0=2,5000001,2,1,999999
The TGRewrite rule 2,5000001,2,1,999999 was used it two networks. Not good.

Changing the TG is a s simple as dialing up a 7 digit tg on your radio
ie dial up 4031665 to access 31665 on the server
turn the dial to 4003023 to access 3023 on the server
Remember you need to key the radio while the hotspot is idle to make the switch to the new TG

Have a look at
https://tgifnetwork.createaforum.com/new-board/