FT5 No go!!!

Help with YSF / Fusion issues
Post Reply
WD8BXS
Posts: 1
Joined: Thu Jun 25, 2020 3:22 pm

FT5 No go!!!

Post by WD8BXS »

Here is a different rub, My FTM300 and my FT70 will both connect to my hotspot and talk through the reflector into a wires-x room, BUT my FT5 will not get through to the room. All 3 of the radios can talk back and forth on the reflector, but the FT5 won't cross the bridge into the wires-x room.

Any ideas??
LB7JI
Posts: 1
Joined: Mon Feb 10, 2020 10:16 pm

Re: FT5 No go!!!

Post by LB7JI »

Same for me!
My ft3d works fine, but the ft5d will not connect through pi-star hotspot.
Does anybody read these messages on this forum?

Regards lb7ji
User avatar
YL3IM
Posts: 39
Joined: Sun Nov 22, 2020 8:38 pm
Location: Riga, Latvia
Contact:

Re: FT5 No go!!!

Post by YL3IM »

Hi,

I had an FT5D recently for a while. Worked well on both MMDVM hotspots and Wires-X one. I noticed no issues.

LB7JI, what do the Pi-Star logs show when you're trying to connect? Is there any RF activity? Are you sure there is no frequency deviation? I also have several FT-70D radios, bought last winter, all of them were slightly off frequency by ~600 Hz down, so I had to adjust them.
User avatar
G8SEZ
Posts: 553
Joined: Fri Apr 13, 2018 8:26 pm

Re: FT5 No go!!!

Post by G8SEZ »

Wires-X is quite bit error sensitive so frequency offsets will likely cause problems.
--

Brian G8SEZ
Post Reply