Problems with audio not passing through DMR to DSTAR ( quadnet)

Help with DMR issues
Post Reply
w8vpc
Posts: 13
Joined: Sun Jun 17, 2018 12:13 am

Problems with audio not passing through DMR to DSTAR ( quadnet)

Post by w8vpc »

Hello,
Here is the scenario..
I have a pistar dmr repeater.
TS 1 = TGIF
TS2 = Brandmeister
DMR Master = DMRGateway

I try to check into a net on TG 31012 (quadnet ). Ncs acknowledged me.
When it was my turn to I make a transmission, my audio drops after a few seconds.
Radio is a vertex VXD-7200 ( like Motorola XPR-4550) running low power on dummy load. (Repeater is a few feet away)

I had a similar problem like this before. When i use Motorola, audio drops out on the other end of the Bridge ( ex. DMR to Fusion)
Then i tried a Allance HD-1 , no problems with audio passing through. The person i was talking too switched from Fusion to DMR and no problems copying my audio.

So what would cause a problem like this?

thanks!

mike w8vpc
Post Reply