forum.pistar.uk

Posted: **Sun Jul 17, 2022 3:07 pm**

I just got a Zumspot with the 1.3" OLED. It may have come from HRO originally but I bought it from someone on QRZ. He had put a fresh copy of Pi-Star on the card and everything came with it.

The problem is, even after an exhaustive search finding settings - the screen is missing entire lines of pixels making it mostly unreadable except for the wan0 address upon bootup.

It is set to Type 6, verified the Log setting is 0, etc. and attached is the best I can get.

https://photos.app.goo.gl/uhz4uDmrn2v5V7qh6 (sorry, can't get the embed to work)

Thanks in advance.
N4BOZ

Posted: **Sun Jul 17, 2022 6:02 pm**

Try "type=3".

Code: Select all

  :
[OLED]
Type=3
Brightness=0
Invert=0
Scroll=0
Rotate=0
Cast=0
LogoScreensaver=0
  :

Posted: **Sun Jul 17, 2022 7:54 pm**

Thanks, but I have. It defaulted to type 3 and that did'nt work.

Posted: **Mon Jul 18, 2022 12:08 am**

They only other possibility I can think of then, besides the OLED having gone bad, is that you may being running under voltage. Have you tried a different power supply?

Posted: **Mon Jul 18, 2022 12:44 am**

Hmmmm, good idea. I'll try that, thanks.

forum.pistar.uk

OLED Pixelated - Mostly unreadable

OLED Pixelated - Mostly unreadable

Re: OLED Pixelated - Mostly unreadable

Re: OLED Pixelated - Mostly unreadable

Re: OLED Pixelated - Mostly unreadable

Re: OLED Pixelated - Mostly unreadable