I want to set up two hot spots, one for Dstar and one for DMR and have them run simultaneously. I am fine with how to configure the DStar and DMR settings, but not clear on how to prevent conflicts between the two hot spots when they are on the same LAN via WiFi
Pretty clear they will need separate simplex frequencies, and suspect they will also need different names on the network.
Would be grateful for anyone who has successfully set up two pi-star hot spots to service simultaneous DStar and DMR activity.
Thanks!
Bill
KK4C
How to set up two hot spots: one for DStar, one for DMR
Re: How to set up two hot spots: one for DStar, one for DMR
Hi,
They won't conflict on the network level. Same as multiple computers within the same LAN
They won't conflict on the network level. Same as multiple computers within the same LAN
Re: How to set up two hot spots: one for DStar, one for DMR
Give each its own frequency and host name and it'll work out fine.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.