Dear all,
I enabled the pi-star remote commands in order to Shutdown, Reboot etc my hotspot via RF. I tried these commands with FT5D and with FT1XD but unfortunately they don't work. My settings are as follow:
[enable]
# Is the Pi-Star Remote Enabled? (true|false)
enabled=true
[keeper]
# Keepers Information
callsign=IK4SWW
[ysf]
# ROOM commands
svckill=99999
svcrestart=99998
reboot=99997
shutdown=99996
hostfiles=99995
Any suggestions ?
Thanks
73 de IK4SWW, Massimo
DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
Re: DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
They are not DTMF tones.
They are room nos.
and need to be called as room nos.
The same as when you use the touch pads to call other YSF rooms.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
They are room nos.
and need to be called as room nos.
The same as when you use the touch pads to call other YSF rooms.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
Thanks for your answer. I tried your suggestion using the rooms nos command, but when I call #99996 the hotspot connects to a chinese room instead to shutdown. Moreover when I call #99997 or #99995 nothing happens.
Thank you
73 de IK4SWW
Thank you
73 de IK4SWW
Re: DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
#NNNNN#
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
Not possible to put a # at the end of the command; Yaesu radios accept only 6 characters (including the initial #).
regards
IK4SWW, Massimo
regards
IK4SWW, Massimo
Re: DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
With both yaesu radios i own, #NNNNN# Works to connect me to the room represented by the 5nos contained within.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
A friend of mine explained me that on FT5D/FT3D etc when you push the "enter" at the end of the string it' equivalent at the final # you suggested me.
I found on the web that also M0FXB tried this procedure without success. Look at his video: https://www.youtube.com/watch?v=2oGtR_2 ... IARY-M0FXB
regards
Massimo
I found on the web that also M0FXB tried this procedure without success. Look at his video: https://www.youtube.com/watch?v=2oGtR_2 ... IARY-M0FXB
regards
Massimo
Re: DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
Have you tried changing the initial 9 to 8 for the shutdown and restart codes?
Someone reported that this worked for him.
Someone reported that this worked for him.
--
Brian G8SEZ
Brian G8SEZ
Re: DTMF commands for Shutdown, Reboot etc. NOT working - FT5D
Yes I tried to replace the initial 9 with a 8 but in my case it doesn't work.
Thanks
Massimo
Thanks
Massimo