Help using mmdvmcal command

General support for the Pi-Star System
Post Reply
iw5akt
Posts: 2
Joined: Fri Jul 29, 2022 1:33 pm
Location: Cascina, IT

Help using mmdvmcal command

Post by iw5akt »

I would need help from the mmdvmcal command on using the "S / s RSSI Mode" option; I tried to give the command but it continuously displays the line:
RSSI: max: 87, min: 87, ave: 87
RSSI: max: 87, min: 87, ave: 87
Thanks for your help.
Claudio

Raspberry Pi 4 Model B Rev 1.1
Pi-Star 4.1.6 Dashboard 20221114 Kernel 5.15.84-v7l+
Modem type: STM32-DVM / MMDVM_HS - Raspberry Pi Hat (GPIO)
FW: HS_Hat:1.5.2
TXCO: 14.7456 MHz
Post Reply