Are there a way to keep the TG up for always RX?

[SM7ZDR]

Hi guyz

I have
•AnyTone AT-D878UV II+
•DV-MEGA 3.5 Nextion Duplex Raspberry Pi4B TwinFan Node/Hotspot

And my big question is
Are there a way to keep the receive always open on ex TG 91?
so I do not need to do a manual short PTT KeyUp on the 878 everytime its been quiet for some minutes to hear anything of the new guyz starts talking?



/Gary

[AF6VN]

If Brandmeister, and you are shown as a hotspot, not repeater, on their system...

Use the interface (did you enable it?) OR BM website to define the talk group as STATIC. Though in the past, the last /hotspot/ activated talk group used to be put into an "auto static" mode -- it would stay active until some other talk group was selected, at which point it became a dynamic group and would time out after something like 15 minutes.

[SM7ZDR]

No I am totally new at the Hotspot/Node thing
I am just happy that I got it to work, only want it to stay open

Where do I find this interface to enable?
(On BM I am Hotspot)

[EA3BIL]

Hi Gary,

You have TWO options to deal with this:

-Via BrandMeister's DashBoard.
-By managing BM from your HS (Pi-Star HotSpot)
ADMINISTRATION screen.


--Via BM's DashBoard:
Acess to BM's DashBoard.
See:

and




--Via ADMINISTRATION at your HS:
See:



Sorry,
Images to be LINKED as they are too big to be attached.

[SM7ZDR]

Ahh Super Rafael you’re the man

Thank you