forum.pistar.uk

Hello all,

Something strange is happening with my hotspot. I am running Pi-Star 4.1.6 on a RPi Zero 2 W using a generic jumbospot. When I try to change reflectors to YSF00001 - Parrot, the hotspot actually links to YSF-CUMBRIA-CQ-UK. This continues to happen after restart.

Service status shows YSFParrot as 'green'.

Wondering if anyone has had a similar problem and what the resolution was.

Thanks in advance and 73,
NB5T

Yes!! I have been seeing the same thing, glad I'm not the only one. If I set my zumspot 3.5 to start up on the parrot reflector, it shows connected to parrot, but if I switch to parrot after being connected to a different node, it will show connected to the ysf-cumbria-cq-uk. Anxious to see what's causing this.

Noted: we'll look at this later today, when get a chance.

Sent via smoke signals from my SM-G935F M1DNS (Admin)

Sorry if I'm late. I had to wait for my registration to be approved.

I also wanted to report this problem. GB-CUMBRIA-CQ-UK was wrongly assigned to the YSF Parrot :
Good news. This is the only duplicate found in the list. As far as I can see, everything else is fine.

I've traced back the error to https://register.ysfreflector.de/, from which the https://www.pistar.uk/downloads/YSF_Hosts.txt gets its list of YSF ids.

Yes. pistar server builds its list from the data kept with the ysf registry.

Sent via smoke signals from my SM-G935F M1DNS (Admin)

Try YSF99999.

That works. Thank you!

This has now been fixed. run an update and should be back to as it was before.

Sent via smoke signals from my SM-G935F M1DNS (Admin)

Thank you !