Page 1 of 1
RX High BER
Posted: Thu Jan 19, 2023 11:53 pm
by KB4TXW
I can't figure out why D-Star mode has such a high BER on receive? If I change the mode over to YSF it's smooth as silk, almost no errors over several days. I have the proper offset configured in the CSS Tool options, TX to the hotspot is fine.
Re: RX High BER
Posted: Fri Jan 20, 2023 10:13 am
by M1DNS
Different radios can require differing offset values.
You will need to find a happy medium where both function adequately.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Re: RX High BER
Posted: Sun Jan 22, 2023 11:54 pm
by KB4TXW
OK, the problem appears to have been with my router's subnet, and the fact that the hotspot was connecting on 2.4GHZ. I corrected my subnet issue, moved it to 5GHZ and my percentage loss and BER have almost disappeared. It's funny that this only surfaced in D-Star, YSF and DMR were fine.
Re: RX High BER
Posted: Mon Jan 23, 2023 7:15 am
by M1DNS
Ok so BER indicates losses between radio and installation. And loss indicate loss over the network (interwebs)
Sent via smoke signals from my SM-G935F M1DNS (Admin)