Dstar and DMR

General support for the Pi-Star System
Post Reply
ki4ehn
Posts: 8
Joined: Wed Oct 27, 2021 2:51 pm

Dstar and DMR

Post by ki4ehn »

This may have been asked before and if it has I am sorry for the double post.

I have a dual band duplex hotspot and would like to know if I can run Dstar and DMR at the same time.

I know they will have to be on different frequencies but will it work?

73
AF6VN
Posts: 821
Joined: Fri Jul 20, 2018 1:15 am

Re: Dstar and DMR

Post by AF6VN »

Clarify:
Dual-band usually means a board that can operate on 2m OR 70cm, but not both at the same time
Duplex is taken to mean the board operates as a REPEATER, rather than the common simplex hot-spot. Repeater boards can typically support both DMR TS1 and TS2 at the same time, but are limited to a single band (no cross-band repeating).

--
AF6VN
Dennis L Bieber
M1DNS
Pi-Star Team
Posts: 1388
Joined: Thu Apr 05, 2018 5:30 am

Re: Dstar and DMR

Post by M1DNS »

Whilst you can run any/ all modes at any one time youll only ever have one active mode thats in use, either tx'ing or rx ing.

You can only set one freq. (simplex or split) in pistar for ur hotspot. *



Sent via smoke signals from my SM-G935F M1DNS (Admin)


Andrew M1DNS.
Pi-star Admin Team.
Post Reply