FT-70D not connecting to Wires-X

[M5KVK]

I know this has been covered before, and I've tried all the solutions (AFAIK), but something is wrong.

• Hotspot running Pi-star 4.1.6 2022114
  Only YSFGateway and YSF2DMR are configured (I have also tried with just YSFGateway)
  YSF00001 - Parrot as Startup Host
  Uppercase Host files and WiresX Passthrough enabled
  Yaesu FT-70D
  FT-70D can talk to Parrot and other reflectors
  BER is less than 1% and I see nothing in the logs

(Sorry, can't attach a picture)

However, when I do the

F-AMS

sequence, I get no response. The dashboard shows the RF In and Out on DG-ID 2 and a Net transmission on DG-ID 0.

I've tried increasing the log levels for MMDVM and YSG Gateway, but can't see anything.

[M5KVK]

BUMP!

[M1DNS]

If the dashboard reports seeing ur transmissions, its working.

If its reporting DG_ID 2 thats set in ur radio. Most reflector traffic routes via DG_ID 0

Sent via smoke signals using my SM-G935F

[M5KVK]

If the dashboard reports seeing ur transmissions, its working.

If its reporting DG_ID 2 thats set in ur radio. Most reflector traffic routes via DG_ID 0

Sent via smoke signals using my SM-G935F

That was it. I fixed it by going into the radio menu and setting `W-DGID` to `AUTO`

Thanks!