forum.pistar.uk

Hi all

I am running the latest version of pi-star and have the D-Star mode activated on the repeater. Now if a user connected to say REF001C and uses it. But forgets to un-link it stays linked forever. I want to add a link timer set, but at the moment I can see the setting, I looked in IRCDDBGateway and MMDVMHost but could see it.

Any help would be great.

Regards

Paul
G7KBR

Its setup is in ircddbgateway.

Reflector1 edit to show eg xlx005 A
(if you dont want to fall back to a set reflector instead use NONE)

Reconnect1 set it 1 thru 11

1 is 5 mins of hearing 0 local traffic before dropping back to your setting as made above.

2=10mins 3=15mins 4=20mins 5=30mins
6=60mins etc etc etc this is the elasped time period the setup waits since hearing the last local keyup to move to ur default (step1 above) eg XLX005 A, NONE etc.

You can edit atstartup1 0 or 1 to add ur fallback connection (step one above) to be the default on startup eg xlx005 A, NONE etc.
Leave it at 0 to not go there on startup or set it to 1 to enact ur default on startup.



Sent via smoke signals using my SM-G935F