End of support STM32F1* boards?

MMDVM_HS Hat hardware
Post Reply
PD0iAE
Posts: 5
Joined: Sun Nov 19, 2023 9:13 pm

End of support STM32F1* boards?

Post by PD0iAE »

I recently bought a Raspberry Pi and wanted to buy a 2019 V1.3 for MMDVM HS dual hat duplex hotspot module.

There's an STM103* chipset on it. But now I came across the MMDVM software on Github that it is no longer (will be) supported:

https://github.com/g4klx/MMDVM/commit/0 ... d3f781dL22

My question is:

- is this correct or am I misinterpreting this?

- If I'm right, are there alternatives to put on a Raspberry Pi?

PS: I'm looking for something with an STM processor because I want to experiment with M17 modulation.
M1DNS
Pi-Star Team
Posts: 1429
Joined: Thu Apr 05, 2018 5:30 am

Re: End of support STM32F1* boards?

Post by M1DNS »

If you want to run m17 ur best to go with a newer board.

Sent via smoke signals using my SM-G935F

Andrew M1DNS.
Pi-star Admin Team.
User avatar
G8SEZ
Posts: 580
Joined: Fri Apr 13, 2018 8:26 pm

Re: End of support STM32F1* boards?

Post by G8SEZ »

Are there any with the same form factor to fit over a Pi Zero 2W in the small cases?

So far I can't see any for sale.
--

Brian G8SEZ
PD0iAE
Posts: 5
Joined: Sun Nov 19, 2023 9:13 pm

Re: End of support STM32F1* boards?

Post by PD0iAE »

M1DNS wrote: Tue Nov 28, 2023 7:57 am If you want to run m17 ur best to go with a newer board.

Sent via smoke signals using my SM-G935F
Where could I find that, could you help me on my way?
M1DNS
Pi-Star Team
Posts: 1429
Joined: Thu Apr 05, 2018 5:30 am

Re: End of support STM32F1* boards?

Post by M1DNS »

Currently i only know of rptr boards capable of running m17 but no hotspot boards.

Sent via smoke signals using my SM-G935F

Andrew M1DNS.
Pi-star Admin Team.
Post Reply