New Zumspot Elite 3.5 no RSSI displaying?
New Zumspot Elite 3.5 no RSSI displaying?
Does anybody out there know who to enable the RSSI field? Its blank and shows no activity. Thanks....
Re: New Zumspot Elite 3.5 no RSSI displaying?
First you need to create an rssi.dat file to make use of rssi.
edit content of the file RSSI file if you have one already included...
Expert mode
../admin/expert/edit_mmdvmhost.php
Find field : RSSIMappingFile
Usually here :: /usr/local/etc/RSSI.dat
43 -43
53 -53
63 -63
73 -73
83 -83
93 -93
99 -99
105 -105
111 -111
117 -117
123 -123
129 -129
135 -135
141 -141
#The data to RSSI.dat
#Values in the RSSI.dat file are obtained using the MMDVMCal calibration program (S mode),
#the values here are for the v. popular GM340UHF radio.
Yours will be differerent depending the output of pistar-mmdvmcal.
Thats providing the rssi does actually work with a hotspot ??
Sent via smoke signals using my SM-G935F
edit content of the file RSSI file if you have one already included...
Expert mode
../admin/expert/edit_mmdvmhost.php
Find field : RSSIMappingFile
Usually here :: /usr/local/etc/RSSI.dat
43 -43
53 -53
63 -63
73 -73
83 -83
93 -93
99 -99
105 -105
111 -111
117 -117
123 -123
129 -129
135 -135
141 -141
#The data to RSSI.dat
#Values in the RSSI.dat file are obtained using the MMDVMCal calibration program (S mode),
#the values here are for the v. popular GM340UHF radio.
Yours will be differerent depending the output of pistar-mmdvmcal.
Thats providing the rssi does actually work with a hotspot ??
Sent via smoke signals using my SM-G935F
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: New Zumspot Elite 3.5 no RSSI displaying?
OK Thank you, actually it is working....I didnt look close enough.....
Re: New Zumspot Elite 3.5 no RSSI displaying?
I have Jumbo spot, FW 1.6.1, Pi-Star 4.1.8, Dashboard 20240210.
RSSI isn't appear in the field on dashboard.
* File /usr/local/etc/RSSI.dat is OK
* The same info is shown OK in Expert mode in menu RSSI Dat and in menu MMDVMHost as RSSIMappingFile '/usr/local/etc/RSSI.dat'
Is there any service to start that?
RSSI isn't appear in the field on dashboard.
* File /usr/local/etc/RSSI.dat is OK
* The same info is shown OK in Expert mode in menu RSSI Dat and in menu MMDVMHost as RSSIMappingFile '/usr/local/etc/RSSI.dat'
Is there any service to start that?
73! Anton aka Tony
EL #2102, EL #53698, DMR #2503041, XLX937-B
Clubs: RC5C, RY3AAL, NMDXC
EL #2102, EL #53698, DMR #2503041, XLX937-B
Clubs: RC5C, RY3AAL, NMDXC
Re: New Zumspot Elite 3.5 no RSSI displaying?
MMDVM Generic firmware has no RSSI support, MMDVM (non generic) FW has the RSSI code in it.
You need to know if your board actually supports RSSI or not, it may just be putting a generic value in the field that never changes if it does not actually support it.
You need to know if your board actually supports RSSI or not, it may just be putting a generic value in the field that never changes if it does not actually support it.
Re: New Zumspot Elite 3.5 no RSSI displaying?
Ah, OK. Thanks.
I know that My HS_HAT used to have RSSI. So, that I asked here about.
Re-install FW of my HS_Hat and RSSI is now appearing on dashboard.
I know that My HS_HAT used to have RSSI. So, that I asked here about.
Re-install FW of my HS_Hat and RSSI is now appearing on dashboard.
73! Anton aka Tony
EL #2102, EL #53698, DMR #2503041, XLX937-B
Clubs: RC5C, RY3AAL, NMDXC
EL #2102, EL #53698, DMR #2503041, XLX937-B
Clubs: RC5C, RY3AAL, NMDXC