forum.pistar.uk

When I run the Check Installation program of the Nextion Installer, I get the following

+ This seems to be Pi-Star
----------------------
Searching MMDVMHost ...
-----------------------
+ MMDVMHost found at /usr/local/bin/MMDVMHost
+ Searching MMDVMHost configuration file ...
+ MMDVMHost configuration file found at /etc/mmdvmhost
+ Transparent Data section found
I Transparent Data Enabeled
I SendFrameType enabled
I Serial port for Nextion is /dev/ttyNextionDriver
+ MMDVMHost is configured for NextionDriver

--------------------------
Searching NextionDriver ...
---------------------------
+ NextionDriver found at /usr/local/bin/NextionDriver
I Nextion is connected to modem

----------------------------
Checking active programs ...
----------------------------
+ MMDVMHost running with PID 1496
- NextionDriver not running

--------------------------------
| REPORT |
--------------------------------
+ MMDVMHost is configured for NextionDriver
+ The Nextion display must be connected to the modem
+ MMDVMHost is running
- NextionDriver is NOT running

Clearly, the NextionDriver is not installing correctly into the /dev folder. What now ?
Thanks in advance..

W0LT

IIRC from way back when, you need to run the install a second time over the top of the first install and then it came up properly.....at least thats what I recall.

GL!

Thanks for tip..that did it.. 73

Excellent! Enjoy!

One more tip...

Nextion driver is ALREADY installed in PiStar image since version 4.1.0 so, no need to install it just configure your system.

Cheers