The Rx field not displaying the Rx freq

Help and support for ZUMSpot Hardware
Post Reply
w1av
Posts: 13
Joined: Sun Nov 05, 2023 2:33 pm

The Rx field not displaying the Rx freq

Post by w1av »

Zumspot Elite 3.5 only few moths old. I noticed today when unit initialized, the field where RX freq displays is BLANK. The TX field is ok showing the proper TX freq. All other fields are displaying properly. I restarted and no change. I shut unit down via the ADMIN>Power>shutdown, wait approx 30 seconds then power unit off with little button on power cord. Everything seems to be working ok though. Running latest version of pi-star 4.1.8 So not sure whats going on.
KC8I
Posts: 3
Joined: Tue Oct 11, 2022 4:39 pm

Re: The Rx field not displaying the Rx freq

Post by KC8I »

I have confirmed that the RX Freq field is no longer populated in recent releases, including v4.1.8 and v4.2.0. I assume this is a bug. I think it first appeared with v4.1.8.

User avatar
MW0MWZ
Site Admin
Posts: 1506
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: The Rx field not displaying the Rx freq

Post by MW0MWZ »

4.2.1 has pretty decent support for NextionDriver now, but even so, some fields are not coming over properly.
There is a request open upstream for that, but it might take a little while for it to get fixed.
Andy

73 de MW0MWZ
http://pistar.uk
Post Reply