YSF configuration has changed?
Posted: Fri Jun 13, 2025 7:59 pm
When "YSF Mode" is enabled on the Configuration page, the "Yaesu System Fusion Configuration" no longer has selections for "Manual" or "Auto" to start when the mmdvm service starts. After "Apply Changes" the mmdvm services restart, but there is no connection to the YSF reflector that was chosen. Things didn't used to be this way. Connection requires the Admin page to complete. Any fix, please?
Pi-Star: v4.2.3
Dashboard: 20250606
Platform: Raspberry Pi Model B Plus Rev 1.2
# uname -a
Linux w7efs 5.10.103+ #1529 Tue Mar 8 12:19:18 GMT 2022 armv6l GNU/Linux
Pi-Star: v4.2.3
Dashboard: 20250606
Platform: Raspberry Pi Model B Plus Rev 1.2
# uname -a
Linux w7efs 5.10.103+ #1529 Tue Mar 8 12:19:18 GMT 2022 armv6l GNU/Linux