forum.pistar.uk

Hi All, just been trying to update the firmware on my Pi-ZeroW, using the command 'To flash MMDVM_HS Hat devices by DB9MAT & DF2ET please use pistar-mmdvmhshatfl
ash', but all I see is command not recognised, any ideas as to where i'm going wrong please

Dennis G8IMN

Dennis,

Make sure you are logging in over SSH to get to the command line of your Pi-Star, from there running
Should give you some output that tells you what to do.

Thanks for the info Andy, have already tried what you suggested, but will give it another go.

Dennis G8IMN

Success, just tried updating and it finally worked, now on HS__HAT V1.3.3 , thanks once again for your help Andy.

Dennis G8IMN

Sorry for hijacking your post,

Just updated my mmdvm hs dual hat and now it not working at all. Unable to read firmware version after 6 attempts

Used sudo pistar-mmdvmhshatflash hs_dual_hat

Its the dual hat from DF2ET DB9MAT
Kinda stuck now


Edit *rolled back to previous firmware and all working ok

What modem is it that you have ?

All sorted, reported the issue on github. Andy CA6JAU quickly fixed the firmware

That explains why we jumped a few versions