forum.pistar.uk

(Admin edit) please dont use the "what gives?" phrase.
It might be common verbage to residents in the usa, but to other countries n cultures its considered insulting.



To answer ur Q.
We're looking at it.


Sent via smoke signals using my SM-G935F

The username and password is rooted in the base OS. So yes you can by following any online guide to change those with access to writing the sd card directly.


The freqs, modes etc. The only way i can think of doing that would be to use the backup feature on a live image.
edit the file, save it ...

Locally...

tail -f /var/log/pi-star/MMDVM*.log

or using SSH across ur network...

ssh [email protected] tail -f /var/log/pi-star/MMDVM*.log

If that doesnt work for you...
first ssh into ur pistar instance, then use the tail command above.

Sent via smoke signals using my SM-G935F

Go to ur dashboard and navigate here..

admin/expert/edit_ircddbgateway.php

Scroll down to where you see

Ircddbenabled make that= 1
Ircddbusername add ur rpts callsign there
Ircddbhostname make that read
ircv4.openquad.net


Ur rptr will now be using the open-quadnet service.

Alt. use the ...

Regards what you have listed in ur radio. If the rptr and its ip isnt listed in the host files there is no way knowing where that rptr is on the web and so no way to connect to it.

Look at the ircddbgateway config, youll see there that you can enter ircddb info (after you signed up) or quadnet ...

Yes and no.

Its not the same as icoms implementation, but it is possible to connect in-bound to a dstar rptr.

There are a couple of provisions though...
The rptr needs to be able to accept inbound connections, it needs to be available with a known IP addtess either by way of it reporting to ...

Nothing is impossible to actually say no, but some things are just simpler.

Can be done, but it won't be easy to do unless you have an above average understanding of ur Linux OS also remember what you end up with will not be pistar. It will only resemble pistar and if we make changes ur install ...

DMR_Hosts.txt updated
--- CURRENT DMR_Hosts.txt 2025-06-19 11:17:56.181635568 +0000
+++ UPDATED DMR_Hosts.txt 2025-06-19 12:18:36.091956503 +0000
@@ -1241,0 +1242 @@
+HB_IT_BAT 0000 hb-bat.duckdns.org passw0rd 62031


pushed to the pistar server as of 13:18 today (21/6/25)

Should get pushed out to ...

iz7exi wrote:Ok thanks for the reply.

NAME: HB_IT_BAT
UDP PORT:62031
STATIC IP: 82.85.236.36
DNS: hb-bat.duckdns.org

What password will your users be using to connect ??

Sent via smoke signals using my SM-G960F

Have a look at setting the hotspots rx offset. You can use the tool in the expert section or manually by adding an offset value say around 300 and add or subtract in small increments until you see ur keyups on the dashboard. Then continue adjustment to fine tune for lowest BER value. (Your aiming ...