forum.pistar.uk

Hello,

unfortunately the Nextion drivers from ON7LDS in the current Pi-Star image (V4.2.3 or V4.2.2) for the USB interface (USB to TTL) are not well implemented, there are a lot of problems!


73 Alfred OE7ABH



Maybe missing information at some fields on Iddle page ?
(CPU Speed, Disk free ...

Can anyone tell me if there is any noticeable difference between routing your Nextion screen via the USB port w/ttl
or soldering directly to the modem? Good, bad, no diff? still sucking power either way.


Using the MMDVM port will limit the transfer speed to Nextion display to 9k6bds 'cause ...

Nextion Driver is already incorporated in PiStar image since v 4.1.0.

So,

How many times are we going to read about it needs to be installed on fresh new setup system ??

From time to time, I feel like a preacher in the desert...

Oky...

And, 20240116 ??

One more tip...

Nextion driver is ALREADY installed in PiStar image since version 4.1.0 so, no need to install it just configure your system.

Cheers

Hi,

Changes/improvements on the 20240105 ??

Thank you.

Are the TX and RX QRGs "spread" at least, 5Mhz?

As per my personal experience, they need to be...

Sorry for delayed answer...

If the previous directions did not help, you may want to try this:
(Assuming you only use the HS for DMR)

Increase the value assigned to TX LEVEL at MODEM section available when acessing MMDVMHost in Expert, Configuration.
That value usually is set to 50%, and as far as ...

Hi Gary,

You have TWO options to deal with this:

-Via BrandMeister's DashBoard.
-By managing BM from your HS (Pi-Star HotSpot)
ADMINISTRATION screen.


--Via BM's DashBoard:
Acess to BM's DashBoard.
See:
https://i.ibb.co/p3jzPbr/STATIC-TGs-1.png
and
https://i.ibb.co/yXB1RsN/STATIC-TGs-2 ...

Hi,

Just one question:

Pi-Stat 3.4.x perfectlly up to date...

Will be able to deal with v2 Key ?


Thank you,
Rafael.