forum.pistar.uk

I assume that you followed this process https://github.com/juribeparada/MMDVM_HS/blob/master/BUILD.md If you have trouble compiling the stm32flash (think it's version 0.5) pi-star comes with stm32flash 0.4 and that will do the trick just fine. You'll need to follow the process for the mmdvm_hs. Sent...

Hmm ! seperation maybe too high? try 10 mhz maybe? I'm only using such a large frequency separation because here in Australia we have access from 430-450MHz so obviously were you don't have access to that amount of frequency due to your countries regulation for the 70cm band you just need to make d...

I'm using a -425 rx offset with firmware 1.4.6 on mine. However I am using the maximum amount of seperation 430.5-449.5 giving me 19MHz between the two... YMMV

Sent from my Pixel 2 XL using Tapatalk

Thanks for the response. Yes I used the command you noted to upgrade. It took me from 1.3.3 to 1.4.6. Frequency spacing is 435.500 rx and 440.500 tx. It seems like I read a thread about having to change a password after firmware update but I can’t find it I didn't need to change the password after ...

Did you flash the correct firmware? sudo pistar-mmdvmhshatflash hs_dual_hat Anything else and that's most likely why it's not working, plus you need to make sure that you are using the largest frequency separation possible to overcome the problem of desence from the transmit side Sent from my Pixel ...

I never got any nibbles from my first post so I made a second! [emoji6]

Sent from my Pixel 2 XL using Tapatalk

Not compatible as that oled uses SPI but the type required for use with MMDVM needs to be I2c. The most common size used is 0.96 inch and come in either white, blue or a yellow/blue. Be careful to note the pin out as some have the vcc & ground switched (only a problem if mounting directly on a J...

I've essentially asked the same question over on...

viewtopic.php?t=655

Sent from my Pixel 2 XL using Tapatalk

Think it's time I got myself a few nextion screens! I keep seeing such great things that people have done... (kinda jealous!) [emoji6]

Sent from my Pixel 2 XL using Tapatalk

How many modes do you currently run? If it's 3 or more this will be the reason, the time spent on each mode during the scan period is enough to cut off part of the wires-X packet, if you press the PTT so you get a lock on YSF then proceed with the wires-X commands it works as expected. Sent from my ...