Page 3 of 3

Re: DMR Gateway dropping out

Posted: Sun Mar 15, 2020 11:35 pm
by VK2FMET
Stephen,
I notice your HS is registered against 8/4 (i.e. 3804 is your local?
I am also registered there
But I do not have any OPTIONS set so I don't know how I got this set. I assume if I have it set I would rather be set to 8/2 (i.e. NSW) but how do I do that?

Re: DMR Gateway dropping out

Posted: Mon Mar 16, 2020 9:53 am
by VK3HAW
VK2FMET wrote:
Sun Mar 15, 2020 11:35 pm
Stephen,
I notice your HS is registered against 8/4 (i.e. 3804 is your local?
I am also registered there
But I do not have any OPTIONS set so I don't know how I got this set. I assume if I have it set I would rather be set to 8/2 (i.e. NSW) but how do I do that?
Hi Alan,
From my current Expert, Full Edit, DMR Gateway:

[DMR Network 2]
Enabled=1
Address=103.93.139.188
Port=55555
TGRewrite0=2,1000001,2,1,999999
TGRewrite1=1,1000001,1,1,999999
PCRewrite0=2,1000001,2,1,999999
PCRewrite1=1,1000001,1,1,999999
Password="PASSWORD"
Debug=0
Id=505081202
Name=DMR+_IPSC2-VKHOTSPOT
Options="UserLink=0;TS1_2=40008;TS1_3=3809;TS2_2=3803;"

This is for duplex hat, drop the "1"'s for simplex hat

TS1_2=40008 is Regional Norhtern Vic with repeaters VK2RDS and VK3RGV

You could use
20008 =VK2RAO , VK2RCG, VK2RCV, VK2RHT, VK2RLE, VK2RMB, VK2ROJ, VK2RWI
30008 =VK1RBM, VK2RGN, VK2RHR, VK2RYS

your choice.

TS2_2=3803; is all Vic repeaters
You could use 3802 for NSW

Stephen

Re: DMR Gateway dropping out

Posted: Mon Mar 16, 2020 9:55 am
by VK3HAW
M1DNS wrote:
Sun Mar 15, 2020 8:56 pm
Try increasing the jitter buffer value by a couple hundred. Found On the DMR network section of mmdvmhost from the expert pages.

Sent from my SM-G935F using Tapatalk
Brilliant, so easy.

Thank you, I'm sure there will be users in .au find this most helpful.

Stephen

Re: DMR Gateway dropping out

Posted: Wed Mar 18, 2020 4:36 pm
by VK7HSE
Just a quick note about using the expert panel to make custom changes. If you make complex changes and save them, they'll work. But if you make changes via the normal configuration section then this will overwrite sections of the complex settings.

So basically if you make advanced editing you should always continue to use the expert editor for all future editing.

Cheers

Sent from my Pixel 4 XL using Tapatalk


Re: DMR Gateway dropping out

Posted: Sun May 03, 2020 1:43 pm
by VK2MPJ
Hi all
I thought I would follow this up.
Since doing a fresh install to upgrade to 4.1.0 DMR GateWay has been working as advertised with no sign of my reported issues.
So it would appear there was something amiss in the install.

Thanks to all who offered advice. Got some good info!

73
Pete VK2MPJ